Hampton PEG/Ion • PEG/Ion 2 • PEG/Ion HT

Hampton PEG/Ion • PEG/Ion 2 • PEG/Ion HT

Applications
  Primary or secondary, polymer, salt and pH matrix crystallization screen for biological macromolecules
Features

Developed at Hampton Research
PEG/Ion is a sparse matrix profile of anions and cations in the presence of monodisperse Polyethylene glycol 3,350 over pH 4.5 – 9.2
PEG/Ion 2 screens a complete profile of titrated organic acids at varying pH levels (3.7 – 8.8) in the presence of monodisperse PEG 3,350
PEG/Ion HT combines PEG/Ion and PEG/Ion 2 in a single 96 Deep Well block
 Description

PEG/Ion, developed by Hampton Research, is a crystallization screen designed to evaluate monodisperse, high purity Polyethylene glycol 3,350 and 48 unique salts representing a very complete range of anions and cations frequently used in the crystallization of biological macromolecules. The primary screening variables are PEG, ion type, ionic strength, and pH. More than 60% of the published crystallizations utilized PEG as a primary crystallization reagent and in approximately 50% of those reports, the PEG was combined with an ion as a secondary crystallization reagent. PEG/Ion reagents are formulated without a buffer and are not pH titrated.
PEG/Ion 2 is an extension to the fundamental crystallization strategy in PEG/Ion. PEG/Ion 2 reagents cover the monodisperse, high purity Polyethylene glycol 3,350 and an array of neutralized and pH adjusted organic acids, multivalent ions, a novel Citrate BIS-TRIS propane buffer system and pH (4 – 8.8). The formulation of PEG/Ion 2 was developed at Hampton Research. Each of the 48 reagents in PEG/Ion 2 contains PEG 3,350 as the polymer (precipitant). The concentration of PEG is varied from 12% w/v to 20% w/v depending upon the type and concentration of buffer/salt paired with the polymer. Thirteen of the forty-eight PEG/Ion 2 reagents contain a separate buffer component. The remaining PEG/Ion 2 reagents are buffered by the titrated organic acid salt. Six of these thirteen conditions feature a novel Citric acid BIS-TRIS propane (CBTP) buffer. The CBTP buffer uses Citric acid and BIS-TRIS propane as the acid base pair to create a two component buffer system effective across pH 2.5 to 9.5. The ratio of Citric acid to BIS-TRIS propane determines the solution pH. Thirty-five of the forty-eight PEG/Ion 2 reagents contain a neutralized or pH adjusted organic acid in the presence of the polymer. Neutralized organic acids are highly effective crystallization salts.1 Four PEG/Ion 2 reagents feature polyvalent cations. Two of these reagents contain cation mixes, saving sample by screening six different cations with only two reagents. Tryptone, a casein digest combinatorial library of peptides, is included in PEG/Ion 2. PEG/Ion 2 reagents 1-30, 42, 45-47 are formulated without a buffer and are not pH titrated.
PEG/Ion contains 48 unique reagents, 10 ml each.
PEG/Ion 2 contains 48 unique reagents, 10 ml each.
PEG/Ion HT contains 1 ml of each reagent from PEG/Ion and PEG/Ion 2 in a single Deep Well block format.
Ready-to-use reagents are sterile filtered and formulated with ultra-pure Type 1 water, using the highest purity salts, polymers, organics and buffers. Individual reagents are available through the Hampton Research Custom Shop.
PEG/Ion • PEG/Ion 2 • PEG/Ion HT

PEG/Ion • PEG/Ion 2 • PEG/Ion HT

Hampton蛋白悬滴结晶板 HDP Hanging Drop Crystallization Plate

Hampton蛋白悬滴结晶板 HDP Hanging Drop Crystallization Plate
美国Hampton Research公司位于加利福尼亚州,是一家专门从事蛋白质晶体研究的生产商。该公司向全球科研人员提供全面的晶体研究试剂和相关实验耗材,同时提供晶体设计和合成方面的定制服务。Hampton Research公司以其先进的生物大分子结晶技术和广泛实用的产品线,不仅为全世界晶体研究人员的工作带来了便捷,而且也受益于科研人员的回馈不断发展自己,目前已成为晶体研究领域最受信赖的品牌之一。
Hampton research主要产品:
Crystallization Screens 用于筛选和优化蛋白质/多肽/核酸结晶的一系列经验证的高精配方型溶液
Optimize Reagents 结晶级别盐类,聚合物,有机溶液或缓冲液
Crystallization Plates, Hardware & Accessories 结晶板(悬滴法和坐滴法,微量透析,微配液,自由界面扩散,凝胶以及无容器悬浮法)及其他配件
Cryocrystallography 低温晶体学耗材如 Crystalcap system,cryoloops
Goniometer Heads&Supplies 测角器头和配件
Protein Crystallization Standards 结晶级别标准蛋白
Custom Shop Crystallization Reagents 定制试剂盒和结晶溶液内的单一组分
StockOptions Kits 内含盐类,缓冲液和冷冻液的简便型试剂盒
Tools,Seeding&Resin 结晶用探针,结晶笔,seeding法结晶工具
Capillary Mounts & Supplies 毛细管,玻璃纤维, 蜡,黏合剂和密封剂
Hampton蛋白悬滴结晶板 HDP Hanging Drop Crystallization Plate
HDP Hanging Drop Crystallization Plate (Swissci)
HDP Hanging Drop Plate
HDP Hanging Drop Crystallization Plate (Swissci)
Single Well with Tool
HDP Hanging Drop Crystallization Plate (Swissci)
Hanging Drop Wells
Applications—Hanging drop crystallization
Features
  Made from optically superior polymer (UVP)
  Allen key novel crystal plug closure system
  Wells are micro-numbered
Description  描述:
The Swissci Hanging Drop Crystallization Plate is a breakthrough for protein crystallization in a 96-well format. For the first time individual wells can be identified and removed without any disturbance to the growing crystals inside the plate.Description
The plate has been developed by Swissci AG together with leading Crystallographers. It is the result of many years of experience in successful robotic high-throughput crystallization.
The Hanging Drop Crystallization Plate offers unique properties that make it ideal for both nanoliter crystallization screening and microliter optimization alike. Made from optically superior polymer (UVP) and with a new design of the wells, the plate allows easy crystal viewing and retrieval. The system is fully covered by design and patent protection.
The Advantages of the Hanging Drop Crystallization Plate
Easy Crystal Retrieval
Raised wide wells make the crystal mounting especially easy. Allen key system allows for smooth removal and subsequent microscopic investigation / X-ray with the novel crystal plug closure all included in the system.
Easy Viewing
The wells are wide conical and have a lens effect for perfect illumination. The micro-numbering ensures you will never loose the location under the microscope.
The optically superior polymer is UV transmissible and can be used to differentiate between salt and protein crystals.
Integral Sealing
Wide partition walls between each well provides a high surface area for very good sealing with the advanced quality sealing tape. The sealing tape is integrated into the kit so there is no need to purchase additional parts prior to starting a procedure.
Wide Range of Volumes
Typical volumes are 50 – 200 µl of reservoir and 10 nanoliter – 5 microliter drop size.
SBS Standard
The complete plate is designed to the 96-well SBS standard for all common holders.

CAT NO NAME DESCRIPTION
HR3-187 Hanging Drop Crystallization Plate (Swissci) 10 plate case

Hampton蛋白悬滴结晶板 HDP Hanging Drop Crystallization Plate 相关产品:

96 Well Hanging Drop Vapor Diffusion Plate
Hanging drop crystallization
ARI Hanging Drop Seals for 96 Well Plates
ARI Hanging Drop Seals for 96 Well Plates
CrystalQuick 96 Well Sitting Drop Plate (Greiner)
Sitting drop crystallization
Detergent Screen HT
96 detergents Deep Well block format
Glass Cover Slide Gizmo Dispenser
Cover Slide Dispenser
Greiner ComboPlate and CrystalBridge
Hanging and sitting drop crystallization
HDP Hanging Drop Crystallization Plate (Swissci)
Hanging Drop Crystallization
Linbro Plate
Hanging drop crystallization
ProCrystal
Protein Crystallization Covers for Hanging Drop Vapor Diffusion
Protein Methods
Daniel M. Bollag, Michael D. Rozycki, & Stuart J. Edelstein
Solubility & Stability Screen
Identify protein specific additives that promote solubility and stability
UVP Hanging Drop Plate Seal (Swissci)
Swissci UVP Hanging Drop Plate Seal
VDX Plate with sealant
Hanging drop crystallization
VDX Plate without sealant
Hanging drop crystallization
VDX48 Plate with sealant
Hanging drop crystallization
VDXm Plate without sealant
Hanging drop crystallization
VDXm Plate with sealant
Hanging drop crystallization

 

Hampton 蛋白结晶向导管Wizard Tube

Wizard Tube 
The Wizard™ Classic line of random sparse matrix screens is designed to increase your probability of producing crystals during the coarse screening phase when crystallizing biological macromolecules (proteins, nucleic acids, peptides, and combinations thereof).
The Wizard Classic reagents are proven to be a highly effective starting point in the screening of biological macromolecules. The Wizard Classic formulations include a large range of crystallants, buffers, and salts covering a broad range of crystallization space at pH levels from pH 4.5 to pH 10.5.Choose from Wizard Classic 1, 2, 3, or 4 non-overlapping formulations in matrix blocks or tubes.

图片
Wizard Cubic LCP
The tools in the Wizard Cubic LCP (lipidic cubic phase) Kit enable researchers to prepare LCP-type crystallizations by hand. Ideal for low-protein experiments: effective protein volume for a single crystallization experiment is about 80 nanoliters. Wizard Cubic LCP Kit tools work especially well when traditional methods have failed to yield crystals. Lipidic cubic phase has worked well for the crystallization of 7TM membrane proteins (proteins with seven transmembrane helices). Four out of six GPCRs (G-protein coupled receptors), an important membrane protein class, and several microbial 7TM proteins have been crystallized using the LCP approach.
图片
CRYO (I、II)
The Wizard Cryo™ line of random sparse matrix screens is designed for scientists who want to avoid the additional step of optimizing a cryoprotectant condition. Every Wizard Cryo formulation flash-freezes to a clear, amorphous glass in liquid nitrogen or in a cryo-stream at 100K. Crystals can be frozen directly from their growth drops, avoiding the additional step of pre-equilibration with an artificial cryo-condition that can damage the crystal. Eleven different cryocrystallants and sparing use of glycerol ensures a broad sampling of possible cryo conditions. Choose from Wizard Cryo 1 or 2 formulations in tubes or Wizard Cryo 1 and 2 together in a 96-well matrix block.
图片

Hampton 蛋白结晶优化试剂 Optimization Screens

Hampton 蛋白结晶优化试剂 Optimization Screens

1、Solubility & Stability Screen  蛋白特异性试剂优化溶解性和稳定性
Protein specific agents for optimization of solubility & stability  
2、Solubility & Stability Screen 2   离子缓冲液
Buffer, pH & ionic strength screen for optimization of solubility & stability
3、Slice pH    PH缓冲液
pH & buffer screen for optimization of crystals or sample solubility & stability
4、Additive Screen  96孔板添加剂试剂盒
96 compound screen for optimization of crystal size & quality
5、Silver Bullets • Silver Bullets Bio
Small molecule additive screen for optimization of crystal size & quality
6、Detergent Screen
Detergent screen for optimization of crystals or sample solubility & stability
7、Ionic Liquid Screen
Ionic liquid additive screen for optimization of crystal size & quality
8、StockOptions Buffer Kits
Titrated buffer sets for optimization of crystals or sample solubility & stability
9、StockOptions Polymer
n of crystal size & quality
10、StockOptions Salt
Salt reagent kit for optimization of crystal size & qualit
11、Polymer reagent kit for optimizatioy
Proti-Ace
In situ proteolysis kit protein for crystallization screening & optimization
12、Reductive Alkylation
Reductive alkylation kit for crystallization screening & optimization
13、Silica Hydrogel Kit
pH neutral silica hydrogel matrix crystallization
14、Low Melting Agarose
Agarose gel matrix crystallization
15、CryoPro
Water soluble cryoprotectant reagent set
16、Heavy Atom Screens
Heavy atom kits for multiple isomorphous replacement
17、I3C Phasing Kit
Produce heavy atom derivative of biological macromolecules for phasing

Hampton蛋白质结晶捞针(结晶环)18 mm Mounted CryoLoop™

Hampton蛋白质结晶捞针(结晶环)18 mm Mounted CryoLoop™

Applications

Cryocrystallography
Features

Adjustable loop orientation
Synthetic CryoLoop on adjustable stainless steel MicroTube
MicroTube specially engineered with EasySnap notches
20 micron diameter nylon CryoLoop

Description
Similar to the Mounted CryoLoop™ in design and function, the Adjustable Mounted CryoLoop allows one to manipulate and orient the CryoLoop to multiple, unique positions previously unattainable with typical cryo setups. The Adjustable Mounted CryoLoop is a 20 micron diameter synthetic loop mounted inside a malleable stainless steel sleeve, which in turn, is mounted inside the EasySnap MicroTube™.
Using a specially designed L-shaped tool (HR5-902) with a positioning notch, one can manipulate the angle and orientation of the CryoLoop by bending and adjusting the angle of the malleable stainless steel insert which holds the CryoLoop. The Adjustable Mounted CryoLoop may be positioned several times. Note: Repeated manipulation will fatigue the sleeve which can lead to failure of the sleeve. The Adjustable Mounted CryoLoop is designed to work with the CrystalCap System components.
The MicroTube is 24 mm in length and is specially engineered with EasySnap™ notches at the 10, 12, 14, 18, and 21 mm measures. To obtain the desired length of MicroTube, simply snap the MicroTube at the desired length and stake it to the CrystalCap™ Magnetic or CrystalCap™ Copper Magnetic. These nylon loops show minimal diffraction, are thin for fast freezing, strong, and aerodynamic.
Most data collection geometries prefer or require a 22 mm length between the base of the cap and the beam. For a 22 mm overall length using the CrystalCap, CrystalCap ALS, CrystalCap ALS HT and CrystalCap SPINE HT, snap the MicroTube at the second notch from the bottom, creating an 18 mm MicrozTube lenghth and secure to the CrystalCap using epoxy or similar adhesive. For a 22 mm over length using the CrystalCap Copper, CrystalCap Copper HT, CrystalCap ALS Copper HT snap the MicroTube at the fifth notch from the bottom (notch closest to the CryoLoop) and secure to the CrystalCap using epoxy or similar adhesive.
The HR5-902 Tool for Adjustable Mounted CryoLoop is not included with the Adjustable Mounted CryoLoop and must be purchased as a separated item.
18 mm Mounted CryoLoop™ - 20 micron
18 mm Mounted CryoLoop
18 mm Mounted CryoLoop™ - 20 micron
18 mm Mounted CryoLoop properly installed in a CrystalCap Magnetic
18 mm Mounted CryoLoop™ - 20 micron
Crystal in CryoLoop

CAT NO NAME DESCRIPTION
HR4-932 18 mm Mounted CryoLoop – 20 micron 0.025 – 0.05 mm – 25 pack
HR4-945 18 mm Mounted CryoLoop – 20 micron 0.05 – 0.1 mm – 25 pack
HR4-947 18 mm Mounted CryoLoop – 20 micron 0.1 – 0.2 mm – 25 pack
HR4-970 18 mm Mounted CryoLoop – 20 micron 0.2 – 0.3 mm – 25 pack
HR4-971 18 mm Mounted CryoLoop – 20 micron 0.3 – 0.4 mm – 25 pack
HR4-972 18 mm Mounted CryoLoop – 20 micron 0.4 – 0.5 mm – 25 pack
HR4-973 18 mm Mounted CryoLoop – 20 micron 0.5 – 0.7 mm – 25 pack
HR4-974 18 mm Mounted CryoLoop – 20 micron 0.7 – 1.0 mm – 25 pack
HR4-918 18 mm Mounted CryoLoop – 20 micron Sampler – 30 pack (5 of each diameter size 0.1 – 1.0 mm)

Hampton Optimize Reagents

Hampton Optimize Reagents
1、Optimize – Polymers
Crystallization grade polymers for formulating screens or optimization
2、Optimize – Organics (Volatile)
Crystallization grade organics (volatile) for formulating screens or optimization
3、Optimize – Organics (Non-Volatile)
Crystallization grade organics (non-volatile) for formulating screens or optimization
4、Optimize – Salts
Crystallization grade salts for formulating screens or optimization
5、Optimize – Buffers
Crystallization grade buffers for formulating screens or optimization
6、Optimize – Solubilizing Agents (NDSB)
Crystallization grade non detergent sulfobetaines
7、Optimize – Reducing Agent
TCEP Hydrochloride
8、Optimize – Monoolein
LCP – Lipidic Cubic Phase
9、Optimize – Cryoprotectants
For cryoprotection of crystals
10、Optimize – Oils for Crystallization
Microbatch crystallization & oil layering
11、Optimize – Izit Crystal Dye
Izit™ color dye to differentiate protein crystals from salt crystals

Hampton 0.1毫米50号玻璃毛细管

Hampton 0.1毫米50号玻璃毛细管

货号:HR6-104
包装:25 pack

  • 英文名:0.1 mm Glass Number 50 Capillary
  • 品牌:Hampton
Hampton 0.1毫米50号玻璃毛细管

Hampton代理–金畔生物

硼硅玻璃50号毛细管壁厚0.01毫米,全长80毫米+ / – 5毫米。提供外径从0.1毫米到2毫米的毛细管,用于X射线数据收集,晶体密度测量和晶体生长实验。毛细管可以用蜡,环氧树脂等密封材料封闭,防止水分和气体。

应用
X射线数据采集
液-液扩散结晶
凝胶针状结晶
特征
50号硼硅玻璃
壁厚 10微米
描述
硼硅玻璃50号毛细管一端呈漏斗形,另一端封闭,壁厚0.01毫米,全长80毫米+/-5毫米,外径从0.1毫米到2毫米。可嵌入,盛放,储存小分子和生物大分子晶体用于X射线数据收集,晶体密度测量和晶体生长实验。毛细管可以用蜡,环氧树脂和其它密封材料密封,防止水分和气体。
请参照“线性吸收系数µcm-1表“,以决定适合的玻璃/石英玻璃毛细管。本表展示的是X射线数据收集时的辐射吸收量。
0.1mm至2.0mm毛细管开口端的基础尺寸为:3.0+/-0.15mm外径 x 0.13+/-0.10 mm壁厚,直径为在毛细管封闭端40毫米处的测量值。
 

货号

产品说明

公差

HR6-104

Size: 0.1 mm – 25 pack

0.1 mm -0.075 / +0.075 mm

HR6-106

Size: 0.2 mm – 25 pack

0.2 mm -0.050 / +0.050 mm

HR6-108

Size: 0.3 mm – 25 pack

0.3 mm -0.050 / +0.100 mm

HR6-110

Size: 0.4 mm – 25 pack

0.4 mm -0.100 / +0.100 mm

HR6-112

Size: 0.5 mm – 25 pack

0.5 mm -0.100 / +0.100 mm

HR6-114

Size: 0.6 mm – 25 pack

0.6 mm -0.100 / +0.100 mm

HR6-116

Size: 0.7 mm – 25 pack

0.7 mm -0.150 / +0.150 mm

HR6-118

Size: 0.8 mm – 25 pack

0.8 mm -0.150 / +0.150 mm

HR6-120

Size: 0.9 mm – 25 pack

0.9 mm -0.150 / +0.150 mm

HR6-122

Size: 1.0 mm – 25 pack

1.0 mm -0.150 / +0.250 mm

HR6-124

Size: 1.5 mm – 25 pack

1.5 mm -0.250 / +0.250 mm

HR6-126

Size: 2.0 mm – 25 pack

2.0 mm -0.250 / +0.250 mm

Hampton晶体删选试剂盒

Hampton晶体删选试剂
1.Screens 晶体删选试剂盒

产品名称 货号 用途备注
Index Kit HR2-144 用于生物大分子结晶
CrystalScreen Kit HR2-110 用于蛋白质,核酸水溶性小分子结晶
Crystal Screen 2 Kit HR2-112
Pegrx 1 HR2-082 用于生物大分子结晶
Pegrx 2 HR2-084 用于生物大分子结晶
Peg/Ion Screen Kit HR2-126 用于生物大分子结晶
Peg/Ion 2 Screen™ HR2-098 用于生物大分子结晶
Saltrx Kit HR2-108 用于生物大分子结晶
Membfac Kit HR2-114 用于膜蛋白和溶解度有限的样品结晶
Crystal Screen Lite HR2-128 用于蛋白质,缩氨酸,核酸的结晶
Natrix Kit HR2-116 用于核酸和蛋白核酸复合物的结晶
Crystal Screen Cyro Kit HR2-122 用于蛋白质,可溶性缩氨酸,核酸和水溶性小分子的初次低温结晶
Nucleic Acid Mini Screen Kit HR2-118 用于核酸片段的结晶
Low Ionic Strength Screen HR2-120 用于完整单抗,单抗片段以及在低离子浓度下溶解度较低的样品结晶
Silver Bullet & Silver Bullet Bio HR2-078 用于生物大分子的初次和二次结晶
HR2-080
Peg/Tacsimate Ph5.8 Crystallization Reagent HR2-090
Peg/Tacsimate Ph 6.8 Crystallization Reagent HR2-092
Peg/Tacsimate Ph 7.8 Crystallization Reagent HR2-094
Additive Screen™ HR2-428 利用样品间和样品溶剂间相互作用来优化晶体生长和改变样品溶解度
产品名称 货号 用途备注
Detergent Screen 1 HR2-410 改善疏水作用引起的非特异性聚集
Detergent Screen 2 HR2-411
Detergent Screen 3 HR2-412
Detergent Screen HR2-408
Heavy Atom Screen Pt HR2-442 Heavy Atoms For Multiple Isomorphous Replacement
Heavy Atom Screen Au HR2-444
Heavy Atom Screen Hg HR2-446
Heavy Atom Screen M1 HR2-448
Heavy Atom Screen M2 HR2-450
I3c Phasing Kit HR3-133

2.Custom Shop Crystallization Reagents 结晶试剂盒中单独的试剂

  1. Optimize™ Reagents晶体生长条件优化试剂

⑴ Optimize™ – Polymers聚合体
⑵ Optimize™- Organics (Volatile) 挥发性有机物
⑶ Optimize™- Organics (Non-Volatile)非挥发性的有机物
⑷ Optimize™- Salts 盐类
⑸ Optimize™- Buffers缓冲液
⑹ Optimize™- Solubilizing Agents (NDSB) 溶解试剂NDSB
⑺ Optimize™ – Reducing Agent还原剂-TCEP氢氯化物
⑻ Optimize™ – Cryoprotectants
⑼ Optimize™ – Oils用于结晶的油类
⑽ Optimize™ – Silica Hydrogel硅胶
⑾ Optimize™ – LM Agarose低熔点琼脂糖
5.Crystallization Plates, Hardware & Accessories结晶耗材
⑴ 24 Well Crystallization Plates 24孔晶体板-分悬滴和坐滴两种
⑵ 48 Well Crystallization Plates 48孔晶体板
⑶ 72 Well Crystallization Plates72孔晶体板
⑷ 96 Well Crystallization Plates 96孔晶体板等

Hampton 水晶透明密封带Crystal Clear Sealing Tape

Hampton 水晶透明密封带Crystal Clear Sealing Tape
Crystal Clear Sealing Tape
3 inch, 1.88 inch, 1.88 inch with dispenser, 0.75 inch with dispenser (left to right)
Crystal Clear Sealing Tape
0.75 inch Crystal Clear Sealing Tape
Applications  应用
Sealing tape used to seal sitting drop crystallization experiments
Description
These optically clear tapes are compatible with protein crystallization reagents. The polypropylene Crystal Clear Sealing Tapes use acrylic solvent based adhesives which are compatible with aqueous crystallization reagents.
Catalog number HR3-511 is a 1.88 inch (48 mm) wide, 3 mil tape on a 43.7 yard (40 M) roll with a 1.5 inch core and is supplied with a green dispenser / cutter.Catalog number HR4-511 is a 1.88 inch wide, 3 mil tape on a 60 yard roll with a 3 inch core and no dispenser / cutter.Two strips of the HR3-511 or HR4-511 will seal a Corning, Cryschem, CrystalClear Strip, Greiner, Intelliplate, Linbro, Swissci (MRC), VDX and VDXm plate.Catalog number HR4-506 is a 3 inch wide, 3 mil tape on a 54.86 yard roll with a 3 inch core and no dispenser / cutter.One strip of the HR4-506 will seal a Corning, Cryschem M, CrystalClear Strip, Greiner, Intelliplate, Swissci (MRC) and VDXm plate.Crystal Clear Mini Sealing Tape HR4-508 is a 0.75 inch (19 mm) wide, 3 mil tape on a 650 inch (16.5 M) roll and is supplied with a clear dispenser / cutter. The tape is useful for resealing or patching wells after mounting crystals. The tape is also wide enough to seal a single row of a Cryschem S or Cryschem M plate.See chart for tape and plate compatibility.

Hampton结晶用缓冲盐试剂盒– SaltRx

Hampton结晶用缓冲盐试剂盒– SaltRx
SaltRx 1 • SaltRx 2 • SaltRx HT

Applications
Primary or secondary, salt and pH matrix crystallization screen for biological macromolecules
Features

Salt versus pH matrix crystallization screen
Samples pH 4 to 9
22 unique salts versus salt concentration and pH
Compatible with microbatch, vapor diffusion, liquid & gel diffusion methods
Tube or Deep Well block format
Preformulated, ready to screen
Developed at Hampton Research
All salts and buffers in screen readily available as Optimize™ reagents for reproducing and optimizing crystals
Individual reagents available through the Hampton Research Custom Shop
 Description
SaltRx was developed by Hampton Research as a primary and secondary, salt and pH based crystallization screen for biological macromolecules. Salt is the only primary crystallization reagent (precipitant) utilized. Based on a design of 96 conditions, the screen evaluates a broad portfolio of crystallization salts of varying concentration and pH. The selection, concentration, and pH of the salts were determined by data mining the BMCD1 and other crystallization databases, crystallization reports in the literature, and internal crystallization trials performed at Hampton Research. Based on this analysis, up to 35% of protein crystallizations involve salt as the primary crystallization reagent. SaltRx can be used as a primary crystallization screen when salt, ionic strength and pH are desired or suspected as appropriate crystallization variables. It is also useful as a secondary screen when salt only reagents/conditions from screens such as Index™, Crystal Screen™, and Grid Screen™ produce crystals and when further screening for additional salt conditions or optimization is desired. Since this screen does not contain volatile organics, it is compatible with microbatch, vapor diffusion, liquid and gel diffusion crystallization methods. SaltRx may also be used for dialysis crystallization in conjunction with Dialysis Buttons™.The original SaltRx kit (HR2-108) contained 96 unique reagents, 10 ml each. This kit has been discontinued and converted into two 48 reagent based kits, SaltRx 1 and SaltRx 2, available separately, which when used together are identical to the original SaltRx.SaltRx 1 contains 48 unique reagents, 10 ml each. SaltRx 1 contains reagents 1-48 of the original SaltRx 96 reagent kit.Salt Rx 2 contains 48 unique reagents, 10 ml each. SaltRx 2 contains reagent 49-96 of the original SaltRx 96 reagent kit.SaltRx HT contains the 96 SaltRx 1 and SaltRx 2 reagents in a single Deep Well block format.Ready-to-use reagents are sterile filtered and formulated with ultra-pure Type 1 water, using the highest purity salts, polymers, organics and buffers. Individual reagents are available through the Hampton Research Custom Shop.
Measured pH range of kit is 4.1 to 9.0 at 25°C
Average measured pH of kit is 6.9 at 25°C
Median measured pH of kit is 7.3 at 25°C
Mode measured pH of kit is 7.4 at 25°C
CAT NO NAME DESCRIPTION
HR2-136 SaltRx HT 1 ml, Deep Well block format
HR2-107 SaltRx 1 10 ml, tube format
HR2-109 SaltRx 2 10 ml, tube format