Hampton50号毛细管Glass Number 50 Capillaries

Hampton50号毛细管Glass Number 50 Capillaries
Glass Number 50 Capillaries

应用:
  X-ray data collection
  Liquid-liquid diffusion crystallization
  Gel acupuncture crystallization
Features
  Glass Number 50 (borosilicate)
  Thin walled – 10 micron
      上海金畔生物作为Hampton蛋白结晶产品的代理商,竭诚为您服务,欢迎新老客户咨询。

Description 描述
Glass Number 50 (borosilicate glass) capillaries that are extremely thin walled (approximately 10 micron wall thickness). The length of the capillary has a well defined diameter, with one end having a funnel shape and the other end closed. Glass capillaries have a wall thickness of 0.01 mm and an overall length of 80 mm +/- 5 mm. Glass capillaries are available in a wide range of outside diameters from 0.1 mm to 2.0 mm. They are designed to mount, hold, and store small molecule and biological macromolecular crystals for x-ray data collection. Capillaries can also be used for crystal density measurements and crystal growth experiments. The capillaries can be sealed tightly against moisture and gases using wax, epoxy, or other sealing materials.
In determining what glass or quartz capillary is right for you, please refer to the “Linear Absorption Coefficient µ cm-1” table. This table indicates the amount of radiation that is absorbed by the capillary during x-ray data collection.
For 0.1 mm to 2.0 mm capillaries the open end capillary tube base size is 3.0 +/- 0.15 mm OD x 0.13 +/- 0.10 mm Wall thickness.
The Diameter is measured 40 mm from the closed end. The tolerances are as follows
Glass Number 50 Capillaries
Glass Number 50 Capillaries
 

0.1 mm -0.075 / +0.075 mm
0.2 mm -0.050 / +0.050 mm
0.3 mm -0.050 / +0.100 mm
0.4 mm -0.100 / +0.100 mm
0.5 mm -0.100 / +0.100 mm
0.6 mm -0.100 / +0.100 mm
0.7 mm -0.150 / +0.150 mm
0.8 mm -0.150 / +0.150 mm
0.9 mm -0.150 / +0.150 mm
1.0 mm -0.150 / +0.250 mm
1.5 mm -0.250 / +0.250 mm
2.0 mm -0.250 / +0.250 mm
Capillaries have only been tested at atmospheric pressure (760 mmHg (torr), 29.92 inHg, 14.696 psi). Use at other pressures has not been tested.
Sigma代理  Abcam代理  CST代理  Santa Cruz代理  Biolegend代理 ebioscience代理  Invitrogen代理   millipore代理  BD流式抗体代理   GeneTe x抗体代理  Novus抗体代理   R&D代理 Biovison代理  Jackson代理  MBL抗体代理  ProSpec抗体代理  Bethyl抗体代理  Antibody Revolution抗体代理  Torrey Pines Biolabs代理  Amresco代理  MPbio代理  Laysan bio代理  NANOCS代理  Avanti代理  wako代理  lumiprobe代理(活性荧光染料)   NEB酶代理  Roche酶代理  Toyobo酶代理   USP代理  EP代理  Dr代理  TRC代理  TCI代理  Reagecon代理 Megazyme代理 Hampton代理(蛋白结晶) whatman代理(滤膜滤纸) GE代理(蛋白纯化) Corning康宁代理  Axygen代理 Falcon代理  NISSUI日水代理 Himedia代理 OXOID代理  BD培养基代理 Ludger代理(糖蛋白分析产品)  Eppendorf代理  Labnet代理  标准品代理 抗体代理 酶试剂代理  培养基代理 耗材代理 Elisa试剂盒代理 。

Hampton 蛋白质结晶试剂和耗材介绍

特色

Hampton 蛋白质结晶试剂和耗材介绍

美国Hampton Research公司位于加利福尼亚州,是一家专门从事蛋白质晶体研究的生产商。该公司向全球科研人员提供全面的晶体研究试剂和相关实验耗材,同时提供晶体设计和合成方面的定制服务。Hampton Research公司以其先进的生物大分子结晶技术和广泛实用的产品线,不仅为全世界晶体研究人员的工作带来了便捷,而且也受益于科研人员的回馈不断发展自己,目前已成为晶体研究领域最受信赖的品牌之一。
上海金畔生物作为Hampton research品牌蛋白结晶产品的代理商,我们将竭诚为您服务,欢迎新老客户咨询。

Hampton research主要产品:

产品分类 特点描述
Crystallization Screens 用于筛选和优化蛋白质/多肽/核酸结晶的一系列经验证的高精配方型溶液
Optimize Reagents 结晶级别盐类,聚合物,有机溶液或缓冲液
Crystallization Plates, Hardware & Accessories 结晶板(悬滴法和坐滴法,微量透析,微配液,自由界面扩散,凝胶以及无容器悬浮法)及其他配件
Cryocrystallography 低温晶体学耗材如Crystalcap system,cryoloops
Goniometer Heads&Supplies 测角器头和配件
Protein Crystallization Standards 结晶级别标准蛋白
Custom Shop
Crystallization Reagents
定制试剂盒和结晶溶液内的单一组分
StockOptions Kits 内含盐类,缓冲液和冷冻液的简便型试剂盒
Tools,Seeding&Resin 结晶用探针,结晶笔,seeding法结晶工具
Capillary Mounts & Supplies 毛细管,玻璃纤维, 蜡,黏合剂和密封剂

美国Hampton Research公司是世界上著名的蛋白质晶体试剂供应商,该公司的产品目录是由上海金畔生物科技有限公司提供,该目录分为12个大类和几十个小类。

Hampton蛋白质结晶试剂及耗材分类

第一类:Crystallization Screens   用于筛选和优化蛋白质/多肽/核酸结晶的一系列经验证的高精配方型溶液

1.PCT Pre-Crystallization Test(PCT预结晶试验)
应用:结晶筛选,确定相应的样品浓度,PCT试验用来预结晶结晶筛选,以确定适当的蛋白质浓度

  1. Slice pH(PH切片)

应用:溶解度和结晶筛选

  1. Solubility & Stability Screen(溶解度和稳定性的屏幕)

应用:溶解性和稳定性屏幕的设计,以协助识别解决方案的条件,促进蛋白质的溶解性和稳定性,并尽量减少蛋白质沉淀。

  1. Index

应用:不同的试剂系统的结晶屏幕的蛋白质复合物,多肽,核酸,水溶性小分子。

  1. Crystal Screen(晶体屏幕)

应用:
主屏幕的可溶性肽,蛋白质,核酸,和水溶性小分子。稀疏矩阵的加法屏幕
5.PEG/Ion Screen & PEG/Ion HT Screen 用于可溶性蛋白的结晶
6.PEG/Ion 2 Screen?用于可溶性生物大分子结晶
7.Crystal Screen? & Crystal Screen? HT 用于蛋白质,复合物,缩氨酸,核酸以及水溶性小分子的传统的经典结晶试剂
8.Crystal Screen 2?用于蛋白质,缩氨酸,核酸以及水溶性小分子的结晶
9.Crystal Screen Lite?用于蛋白质,缩氨酸和核酸的结晶试剂
10.Crystal Screen Cryo?用于蛋白质,缩氨酸,核酸的结晶
11.Grid ScreenTM用于蛋白质的结晶,分为七小类。
12.Quik Screen?用于可溶性蛋白的结晶
13.Quik Optimize?快速优化试剂,与Quik Screen? 或 custom screen配套使用
14.Low Ionic Strength Screen?用于完整的单克隆抗体,单克隆抗体片段以及低离子浓度很少溶解的蛋白的结晶
15.Nucleic Acid Mini Screen?用于核酸片段的结晶化
16.Natrix?用于核酸,蛋白核酸聚合物的结晶
17.MembFac?& MembFac? HT用于膜蛋白的结晶
18.Additive Screen?增强或改变样品可溶性的试剂
19.Detergent Screen?去垢剂
20.Heavy Atom Screens重原子结晶试剂
21.Izit Crystal Dye?蛋白染色试剂,用于区分蛋白晶体和盐晶体

第二类:Custom Shop Crystallization Reagents  结晶试剂盒中单独的试剂

  1. Solubility & Stability Individual Reagents
  2. Slice pH Individual Reagents
  3. Ionic Liquid Screen Individual Reagents
  4. Proti-Ace & Proti-Ace 2 Individual Reagents
  5. PCT Individual Reagents
  6. Silver Bullets & Silver Bullets HT Individual Reagents
  7. Silver Bullets Bio & Silver Bullets Bio HT Individual Reagents
  8. Index • Index HT Individual Reagents
  9. PEGRx 1 Individual Reagents
  10. PEGRx 2 Individual Reagents
  11. SaltRx Individual Reagents
  12. PEG/Ion Individual Reagents
  13. Crystal Screen Lite Individual Reagents
  14. Crystal Screen Cryo Individual Reagents
  15. Crystal Screen 2 Cryo Individual Reagents
  16. Grid Screen Ammonium Sulfate Individual Reagents
  17. Grid Screen PEG 6000 Individual Reagent
  18. Grid Screen Sodium Chloride Individual Reagents
  19. Grid Screen PEG/LiCl Individual Reagents
  20. Quik Screen Individual Reagents
  21. Natrix Individual Reagents

第三类:Optimize Reagents 优化试剂

1.Optimize-Polymers聚合体
2.Optimize-Organics (Volatile) 挥发性有机物
3.Optimize-Organics (Non-Volatile)非挥发性的有机物
4.Optimize-Salts 盐类
5.Optimize-Buffers缓冲液
6.Optimize-Solubilizing Agents (NDSB) 溶解试剂NDSB
7.Optimize-Reducing Agent还原剂-TCEP氢氯化物
8.Optimize-Cryoprotectants
9.Optimize-Oils用于结晶的油类
10.Optimize-Silica Hydrogel硅胶
11.Optimize-LM Agarose低熔点琼脂糖

第四类:StockOptions Kits

  1. StockOptions Salt
  2. StockOptions pH
  3. StockOptions Buffer
  4. CryoPro

第五类:Crystallization Plates, Hardware & Accessories 结晶耗材

1.24 Well Crystallization Plates 24孔晶体板-分悬滴和坐滴两种
2.48 Well Crystallization Plates 48孔晶体板
3.72 Well Crystallization Plates72孔晶体板
4.96 Well Crystallization Plates 96孔晶体板
5.384 Well Crystallization Plates 384孔晶体板-用于坐滴的结晶
6.Cover Slides & Related Tools
7.Glass Sitting Drop Rods用于坐滴的结晶
8.Micro-Bridges?微桥-坐滴结晶的支撑物
9.Glass Plates – 3 and 9 Well3孔和9孔玻璃板
10.Sealants, Sealing Grease, Oils, Applicator密封油脂,油及其它器具
11.Sealing Films, Tapes, Mats & Covers
12.Microdialysis Buttons, Rods & Membranes微量渗析结晶化
13.Granada Crystallization Box

第六类:Tools, Seeding & Resin(结晶工具、树脂)

  1. Tungsten-carbide Glass Cutter
  2. X-Acto Gripster Knife
  3. Micro-Tools™ Set
  4. Micro-Tools II™ Set
  5. Forceps
  6. Crystal Probe™
  7. Crystal Pencil
  8. Seed Bead
  9. Seeding Tool

第七类:Cryocrystallography

  1. CrystalCap HT™ Systems
  2. CrystalCap Magnetic™ Systems
  3. CrystalCap™ Systems
  4. CryoLoops & MicroTubes
  5. Cryo Tools
  6. Canes, Sleeves, Coders & Boxes
  7. Dewars

第八类:Capillary Mounts & Supplies(毛细管座椅支架供应)
第九类:Goniometer Heads & Supplies(测角头及用品)
第十类:Xenon Derivatization(氙气衍生物)
第十一类:Labels & Pens(标签和记录笔)
第十二类:Protein Crystallization Standards(蛋白质结晶的标准)
Hampton代理,Hampton上海代理,Hampton北京代理,Hampton广州代理,Hampton总代理,Hampton一级代理,Hampton特约代理,Hampton现货上海金畔生物科技有限公司Hampton专业代理。
Sigma代理  Abcam代理  CST代理  Santa Cruz代理  Biolegend代理 ebioscience代理  Invitrogen代理   millipore代理  BD流式抗体代理   GeneTe x抗体代理  Novus抗体代理   R&D代理 Biovison代理  Jackson代理  MBL抗体代理  ProSpec抗体代理  Bethyl抗体代理  Antibody Revolution抗体代理  Torrey Pines Biolabs代理  Amresco代理  MPbio代理  Laysan bio代理  NANOCS代理  Avanti代理  wako代理  lumiprobe代理(活性荧光染料)   NEB酶代理  Roche酶代理  Toyobo酶代理   USP代理  EP代理  Dr代理  TRC代理  TCI代理  Reagecon代理 Megazyme代理 Hampton代理(蛋白结晶) whatman代理(滤膜滤纸) GE代理(蛋白纯化) Corning康宁代理  Axygen代理 Falcon代理  NISSUI日水代理 Himedia代理 OXOID代理  BD培养基代理 Ludger代理(糖蛋白分析产品)  Eppendorf代理  Labnet代理  标准品代理 抗体代理 酶试剂代理  培养基代理 耗材代理 Elisa试剂盒代理 。

Hampton CrystalEX Second Generation (Corning)

Hampton CrystalEX Second Generation (Corning)
Crystal<i>EX</i> Second Generation (Corning)
CrystalEx Plates
Applications
   Sitting drop crystallization
Features

96 well sitting drop plate
Round and conical flat bottom drop well shapes
1, 2 or 4 microliter drop wells
1, 3 or 5 drop wells per reservoir
Hydrophilicity treated or untreated
PZero or COC plate material–UV imaging compatible

Description
The second generation of Corning® 96 Well, sitting drop format plates are built to SBS specifications, making them well suited for high throughput crystallization and are fully compatible with robotic equipment. The plates are available in several different configurations with varying drop well shapes, plate materials, and number of drop wells per reagent well. The basic plate design is one reagent well flanked by one or three drop wells, with SBS standard spacing between the centers of adjacent well clusters. One may choose a plate with small (1 µl), medium (2 µl), or large (4 µl) drop well volumes. The choice of round or conical flat well shapes are available. The PZero polymer provides for zero background polarization and is non-birefringent. PZero plates are not treated. The COC polymer offers high chemical resistance. Both types of plastic feature improved transparency. The reservoir numbers are embossed on each individual well for easy identification. Drop well locations conform to SBS standards for robotic handling. The low-volume reagent well saves on reagent costs. The plates can be sealed using Crystal Clear Sealing Film (HR3-609), 3 inch wide Crystal Clear Sealing Tape (HR4-506) or ClearSeal Film™ (HR4-521).
Corning has discontinued 3557 – special pricing and limited inventory available for this item only.

CAT NO NAME DESCRIPTION
HR8-135 Corning 3556 4µl round drop well, 1 drop well, COC, untreated – 10 plate case
HR8-134 Corning 3556 4 µl  round drop well, 1 drop well, COC, untreated – 40 plate case
HR8-137 Corning 3551 4 µl conical flat drop well, 1 drop well, COC, treated – 10 plate case
HR8-136 Corning 3551 4µl conical flat drop well, 1 drop well, COC, treated – 40 plate case
HR8-139 Corning 3552 2 µl round drop well, 3 drop well, COC, untreated – 10 plate case
HR8-138 Corning 3552 2µl  round drop well, 3 drop well, COC, untreated – 40 plate case
HR8-141 Corning 3553 2 µl conical flat drop well, 3 drop well, COC, untreated – 10 plate case
HR8-140 Corning 3553 2 µl conical flat drop well, 3 drop well, COC, untreated – 40 plate case
HR8-147 Corning 3550 1µll conical flat drop well, 3 drop well, COC, untreated – 10 plate case
HR8-146 Corning 3550 1µl conical flat drop well, 3 drop well, COC, untreated – 40 plate case
HR8-160 Corning 3557 1 µl conical flat drop well, 5 drop well, PZero – 10 plate case
HR8-158 Corning 3557 1 µl conical flat dro p well, 5 drop well, PZero – 40 plate case

Hampton 蛋白结晶删选试剂– Index HT

Hampton 蛋白结晶删选试剂– Index HT
Applications
Primary, diverse reagent system crystallization screen for proteins, complexes, peptides, nucleic acids, & water soluble small molecules
多样结晶试剂系统删选试剂盒,用于蛋白质,复合物,肽,核酸,和水溶性的小分子。
Features
 Developed at Hampton Research
Screens classic, contemporary, & modern crystallization reagents
Samples pH 3 to 9
Compatible with microbatch, vapor diffusion, & liquid diffusion methods
Specially formulated reagent zones:
1 .Traditional salts versus pH
2.Neutralized organic acids
3.High [salt] with low [polymer]
4.High [polymer] with low [salt]
5.Low ionic strength versus pH
6.PEG & Salt versus pH
7.PEG & Salt
 Tube or Deep Well block format

Description
Index is designed as a 96 reagent crystallization screen that combines the strategies of the grid, sparse matrix, and incomplete factorial screening with traditional, contemporary, and new crystallization reagent systems into a highly effective and efficient format.
Index, as the name implies, efficiently samples a series of specially formulated reagent zones to identify which reagent class or classes and pH are effective in producing crystals or limiting sample solubility. Results from Index can be used to design optimization experiments and to identify follow on screens by reagent class. For example, positive results with salt based reagents in Index may be followed up with further screening using SaltRx or Grid Screen Salt HT. Success with polymer based reagents in Index may be followed up with further screening using PEGRx or PEG/Ion.
Index utilizes a broad, yet refined portfolio of crystallization reagent systems. These include the following: (1) traditional salts such as Ammonium sulfate and Sodium chloride versus pH; (2) neutralized organic acids such as Sodium malonate and Tacsimate; (3) High salt concentration mixed with low polymer concentration as well as high polymer concentration mixed with low salt concentration and; (4) Low ionic strength using polymers such as PEG, MPD, Pentaerythritols versus pH. These reagent systems are formulated across a sparse matrix and incomplete factorial of concentration ranges, sampling a pH range of 3 to 9.
Index contains 96 unique reagents, 10 ml each.
Index HT contains 96 unique reagents in a single Deep Well block format.
Ready-to-use reagents are sterile filtered and formulated with ultra-pure Type 1 water, using the highest purity salts, polymers, organics and buffers. Individual reagents are available through the Hampton Research Custom Shop.
Measured pH range of kit is 3 to 9 at 25°C
Average measured pH of kit is 6.8 at 25°C
Median measured pH of kit is 6.9 at 25°C
Index • Index HT
Index • Index HT
Apo Kinase crystal. Initial hit from the Hampton Research Index Screen. Annie Hassell, Glaxo Smithkline.
Index • Index HT
Crystal of a heme-based sensor from Thermoanaerobacter Tengcongensis grown using the Hampton Research Index screen. Patricia Pellicena & John Kuriyan at University of California, Berkeley, USA.

CAT NO NAME DESCRIPTION
HR2-144 Index 10 ml, tube format
HR2-134 Index HT 1 ml, Deep Well block format

Hampton 24孔悬滴板 VDX Plate with sealant(带密封剂)

Hampton 24孔悬滴板 VDX Plate with sealant(带密封剂)
VDX Plate with sealant
Applications

Hanging drop crystallization
Sitting drop crystallization with Micro-Bridges® or Glass Sitting Drop Rods™
Dialysis crystallization with Dialysis Buttons™
Features

24 well plate with raised cover
Sealant applied to 24 wells, ready to seal with cover slides
Compatible with 22 mm diameter square and circle cover slides
Optically clear plastic
Extremely versatile and cost-effective crystallization platform
Compatible with UV crystal imaging when used with HR3-231 and HR3-233 – 22 mm x 0.22 mm Siliconized circle cover slides and HR3-215 and HR3-217 – 22 mm x 0.22 mm Siliconized square cover slides

Description
24 well crystallization plate for hanging drop or sitting drop vapor diffusion crystallization (when used with Micro-Bridges or Glass Rods), or dialysis crystallization (when used with Dialysis Buttons). Stackable, optically clear plastic 24 well plates with raised covers (to allow room for cover slides) and flat bottoms for exceptional optics. Raised, wide rings around each reservoir (well) minimize cross contamination and allow each well to be individually sealed with 22 mm diameter circle or square cover slides. Plates are individually wrapped and supplied with applied sealant. 15.0 cm x 10.8 cm plate footprint is convenient for manual pipetting and well access while at the same time compatible with some automated liquid handling systems. Approximate dimensions: 15.0 cm x 10.6 cm x 2.2 cm. Approximate well size: 1.7 cm x 1.6 cm. Typical well volume: 500 to 1,000 µl. Well capacity: 3.5 ml.

CAT NO NAME DESCRIPTION
HR3-172 VDX邃「 Plate with sealant 24 plate case
HR3-170 VDX邃「 Plate with sealant 100 plate case

Hampton 96孔坐滴蛋白结晶板–Intelli-Plate

Hampton 96孔坐滴蛋白结晶板–Intelli-Plate
在生命科学领域,上海金畔生物为业界提供了丰富的实验室和生物医药生产研发的产品。庆祝上海金畔生物正式成为Hampton Intelli-Plate 96孔蛋白结晶板的签约代理商,在这里要感谢广大客户多年来对上海金畔生物科技有限公司的支持和厚爱,我们将一如既往的为广大客户带来Hampton Intelli-Plate 96孔蛋白结晶板高品质的产品和服务,欢迎广大新老客户来电咨询。
Intelli-Plate 96 (Art Robbins Instruments)
Applications
  Sitting Drop Crystallization   用于蛋白坐滴结晶
Features  特征:

SBS microplate footprint & standard well spacing
Optically clear wells provide for superior crystal imaging
Well layout makes crystal harvesting easier
UV transmissible and low birefringence
2 well versions available in small and large drop well or two identical shallow drop wells
3 well versions are ideal for optimizing protein concentration, additive screens, drop ratio and combinatorial experiments
Rounded reservoir corners to prevent reservoir (MPD) creep

Description
Art Robbins Instruments has developed the ideal family of plates for crystallography applications: the Intelli-Plate. All versions of the Intelli-Plate have the SBS microplate footprint and standard well spacing and are ideal for manual or automated processing.
The Intelli-Plate 96-2 Low Profile (Art Robbins 102-0001-10 Hampton Research HR3-116 and HR3-117) is a low profile version of the Intelli-Plate 96-2 LVR (Low Volume Reservoir). Reservoir volume: 100 µl max. Drop well volume: 4 µl and 10 µl max. UV transmissible and low birefringence.
The CrystalMation Intelli-Plate 96-3 low-profile crystallization plate (Art Robbins 102-0001-13 Hampton Research HR3-118 and HR3-119) is a low profile version of the Intelli-Plate 96-3 LVR (Low Volume Reservoir). The plate is designed for sitting drop vapor diffusion crystallization experiments. It is constructed from optically clear, UV-transmissible, chemically resistant plastic with superior low birefringence. The low-profile construction allows for higher density in plate storage and imaging systems, maximizing your investment and valuable space. The plate is designed to be a substantial improvement in existing low-profile plates, allowing for superior sealing due to thicker well design and a flat sealing surface. It has been built to the SBS (Society for Biomolecular Screening) standard dimensions with 8 vertical wells along the left side of the plate (A-H) and 12 horizontal wells along the top of the plate (1-12). It is compatible with automated instrumentation including the CrystalMation line of instruments from Rigaku. The plate features three identical sized sample drop wells per reservoir. The wells are concave depressions along the left side (Y-axis) of the plate and are located on the ledge above the adjacent, flat bottom reagent reservoir. Each well features a round bottom for easy crystal harvesting and can hold up to 1 µl of sample. The multiple well design allows for combinatorial experiments, complex co-crystallization experiments for ligand screening, or for drop concentration variation. The reagent reservoir is typically filled with 50 to 70 µl of reagent. Reservoir volume: 100 µl max. Drop well volume: 1 µl max. UV transmissible and low birefringence.
The Intelli-Plate 96-2 LVR (Art Robbins 102-0001-00 Hampton Research HR3-143 and HR3-145) is a Low Volume Reservoir version of the original Intelli-Plate. Reservoir volume: 100 µl max. Drop well volume: 1 µl max. UV transmissible and low birefringence.
The Intelli-Plate 96-3 LVR (Art Robbins 102-0001-03 Hampton Research HR3-183 and HR3-185) is a Low Volume Reservoir, 3 drop well version of the Intelli-Plate. Reservoir volume: 100 µl max. Typical reservoir volume 50 µl. Drop well volume: 1 µl max. UV transmissible and low birefringence.
The Intelli-Plate 96-2 Original crystallization plate (Art Robbins 102-0011-00 Hampton Research HR3-297 and HR3-299) is an optically clear plate for sitting drop vapor diffusion crystallization. All wells have standard 9 mm spacing to conform to SBS standards with 8 vertical wells along the left side of the plate (A-H) and 12 horizontal wells along the top of the plate (1-12). This plate features two locations for sample per reservoir. The sample drop locations are located along the left side of the reagent reservoir, along the Y-axis of the plate. The sample wells are concave depressions on the ledge above the adjacent, flat bottom reagent reservoir. One sample well is located above the second sample well. The top sample well can hold 10 µl or less of sample. The lower sample well can hold 4 µl or less of sample. The reagent reservoir is typically filled with 100 µl of reagent and is capable of holding up to 300 µl of reagent. The sidewalls separating adjacent wells or reservoirs are 0.9 and 1.0 mm thick in order to offer a larger area for sealing the plate and a separation of the reservoirs. This plate is rigid, with virtually no torsional flex and is designed for either manual or automated pipetting. UV transmissible and low birefringence.
The Intelli-Plate Flat Shelf (Art Robbins 102-0001-01 Hampton Research HR8-171 and HR8-172) crystallization plate is a flat drop shelf version of the original Intelli-Plate. Reservoir volume: 300 µl max. No drop well. UV transmissible and low birefringence.
The Intelli-Plate 96-2 Shallow Well (Art Robbins 102-0001-20 Hampton Research HR3-163 and HR3-164) has two identically sized 2 µL reaction wells and a 140 µL screen reservoir. Each of the two identical well features a round bottom shallow well design for easy crystal harvesting and is arranged in an 8 x 12 array. This plate has low birefringence and is UV compatible. This plate is also available in a low profile height (Art Robbins 102-0001-21).
The plates can be sealed using Crystal Clear Sealing Film (HR3-609), 3 inch wide Crystal Clear Sealing Tape (HR4-506) or ClearSeal Film™ (HR4-521).
The height of Intelli-Plate is 0.560 inches. The height of Intelli-Plate Low Profile is 0.315 inches (8.001 mm).
Intelli-Plate 96 (Art Robbins Instruments)
Intelli-Plate 96-3

CAT NO NAME DESCRIPTION
HR3-116 Intelli-Plate 96-2 Low Profile 20 plate case
HR3-117 Intelli-Plate 96-2 Low Profile 80 plate case
HR3-118 CrystalMation Intelli-Plate 96-3 low-profile 20 plate case
HR3-119 CrystalMation Intelli-Plate 96-3 low-profile 80 plate case
HR3-143 Intelli-Plate 96-2 LVR 10 plate case
HR3-145 Intelli-Plate 96-2 LVR 40 plate case
HR3-183 Intelli-Plate 96-3 LVR 10 plate case
HR3-185 Intelli-Plate 96-3 LVR 40 plate case
HR3-297 Intelli-Plate 96-2 Original 10 plate case
HR3-299 Intelli-Plate 96-2 Original 40 plate case
HR8-171 Intelli-Plate Flat Shelf 10 plate case
HR8-172 Intelli-Plate Flat Shelf 40 plate case
HR3-163 Intelli-Plate 96-2 Shallow Well 10 plate case
HR3-164 Intelli-Plate 96-2 Shallow Well 40 plate case
HR3-181 Intelli-Plate 96-2 Shallow Well Low Profile 20 plate case
HR3-182 Intelli-Plate 96-2 Shallow Well Low Profile 80 plate case

Sigma代理  Abcam代理  CST代理  Santa Cruz代理  Biolegend代理 ebioscience代理  Invitrogen代理   millipore代理  BD流式抗体代理   GeneTe x抗体代理  Novus抗体代理   R&D代理 Biovison代理  Jackson代理  MBL抗体代理  ProSpec抗体代理  Bethyl抗体代理  Antibody Revolution抗体代理  Torrey Pines Biolabs代理  Amresco代理  MPbio代理  Laysan bio代理  NANOCS代理  Avanti代理  wako代理  lumiprobe代理(活性荧光染料)   NEB酶代理  Roche酶代理  Toyobo酶代理   USP代理  EP代理  Dr代理  TRC代理  TCI代理  Reagecon代理 Megazyme代理 Hampton代理(蛋白结晶) whatman代理(滤膜滤纸) GE代理(蛋白纯化) Corning康宁代理  Axygen代理 Falcon代理  NISSUI日水代理 Himedia代理 OXOID代理  BD培养基代理 Ludger代理(糖蛋白分析产品)  Eppendorf代理  Labnet代理  标准品代理 抗体代理 酶试剂代理  培养基代理 耗材代理 Elisa试剂盒代理 。

Hampton Siliconized Glass Cover Slides

Hampton Siliconized Glass Cover Slides

ApplicationsHanging, sitting or sandwich drop crystallization
FeaturesHigh purity of glassSiliconized, hydrophobic glass surface0.22 mm & 0.96 mm glass thicknessThicker glass slides preserve temperature longer12 mm, 18 mm, & 22 mm glass diameterCircle & squareUV Compatible (>85% transmission)
12 x 0.22 mm Circle
18 x 0.22 mm Circle
22 x 0.22 mm Circle & Square
Description
Siliconized glass cover slides allow a droplet to be suspended in a position which provides near optimal conditions for vapor diffusion with the surrounding reservoir solution. These siliconized glass cover slides provide a consistent, high quality finish for crystallization experiments. The hydrophobic surface produces a drop which “stands well” and does not flatten on the glass. The siliconized surface prevents the adhesion of crystals and precipitate onto the glass surface. Use Dow Corning Vacuum Grease (HR3-510), Dow Corning 7 Release Compound (HR3-508), or immersion oil to seal cover slide to plate. Available in 12, 18 or 22 mm diameter circles and 22 mm diameter squares. Available in 0.22 mm or 0.96 mm glass thickness. The 0.96 mm thick slides are virtually unbreakable during crystallization handling.
The following slides are UV transmissable (>85%):
HR3-277 and HR3-279 – 12 mm x 0.22 mm Siliconized circle cover slides
HR3-231 and HR3-233 – 22 mm x 0.22 mm Siliconized circle cover slides
HR3-239 and HR3-241 – 18 mm x 0.22 mm Siliconized circle cover slides
HR3-215 and HR3-217 – 22 mm x 0.22 mm Siliconized square cover slides

图片

图片
Plain Glass Cover Slides
ApplicationsHanging, sitting or sandwich drop crystallization
Features
0.22 mm glass thickness
12 mm glass diameter
Hydrophilic glass surface
Circle & squareDescription
Plain, non-siliconized, hydrophilic glass cover slides. Useful for hanging drop, sitting drop, and sandwich drop vapor diffusion crystallization methods. The hydrophilic surface creates a drop which is more flat than a drop on a siliconized surface. This offers enhanced imaging for very small drops. Use Dow Corning® Vacuum Grease (HR3-510), Dow Corning® 7 Release Compound (HR3-508), or immersion oil to seal cover slide to plate.
HR3-209T 12 mm Plain circle cover slides for Tecan robot 5 oz case (~2,400 slides)
图片

图片
HR3-209T 12 mm Plain circle cover slides for Tecan robot 5 oz case (~2,400 slides)
PEN-VAC Kit
ApplicationsHolding and manipulating small, flat surfaces such as glass cover slides
FeaturesSelf-contained vacuumNo power neededCompactDescription
PEN-VAC is a great tool for handling small, flat surfaced objects such as plain and siliconized cover slides, as well as plastic slides. Simply depress the side button, touch the tip to the object to be lifted and release the button. PEN-VAC creates a totally self-contained vacuum that lifts up to 50 grams for up to one minute. Less than an ounce, the lightweight aluminum body fits in a pocket. No power supply needed. The kit includes one PEN-VAC with 5 3/4″ blue body, (3) angled and (3) straight probes with (2) each 1/8”, 1/4”, 3/8” diameter blue silicone vacuum cups . It is packaged in a clear plastic storage case.
图片
HR3-251  PEN-VAC Kit

Hampton PEG/Ion • PEG/Ion 2 • PEG/Ion HT

Hampton PEG/Ion • PEG/Ion 2 • PEG/Ion HT

Applications
  Primary or secondary, polymer, salt and pH matrix crystallization screen for biological macromolecules
Features

Developed at Hampton Research
PEG/Ion is a sparse matrix profile of anions and cations in the presence of monodisperse Polyethylene glycol 3,350 over pH 4.5 – 9.2
PEG/Ion 2 screens a complete profile of titrated organic acids at varying pH levels (3.7 – 8.8) in the presence of monodisperse PEG 3,350
PEG/Ion HT combines PEG/Ion and PEG/Ion 2 in a single 96 Deep Well block
 Description

PEG/Ion, developed by Hampton Research, is a crystallization screen designed to evaluate monodisperse, high purity Polyethylene glycol 3,350 and 48 unique salts representing a very complete range of anions and cations frequently used in the crystallization of biological macromolecules. The primary screening variables are PEG, ion type, ionic strength, and pH. More than 60% of the published crystallizations utilized PEG as a primary crystallization reagent and in approximately 50% of those reports, the PEG was combined with an ion as a secondary crystallization reagent. PEG/Ion reagents are formulated without a buffer and are not pH titrated.
PEG/Ion 2 is an extension to the fundamental crystallization strategy in PEG/Ion. PEG/Ion 2 reagents cover the monodisperse, high purity Polyethylene glycol 3,350 and an array of neutralized and pH adjusted organic acids, multivalent ions, a novel Citrate BIS-TRIS propane buffer system and pH (4 – 8.8). The formulation of PEG/Ion 2 was developed at Hampton Research. Each of the 48 reagents in PEG/Ion 2 contains PEG 3,350 as the polymer (precipitant). The concentration of PEG is varied from 12% w/v to 20% w/v depending upon the type and concentration of buffer/salt paired with the polymer. Thirteen of the forty-eight PEG/Ion 2 reagents contain a separate buffer component. The remaining PEG/Ion 2 reagents are buffered by the titrated organic acid salt. Six of these thirteen conditions feature a novel Citric acid BIS-TRIS propane (CBTP) buffer. The CBTP buffer uses Citric acid and BIS-TRIS propane as the acid base pair to create a two component buffer system effective across pH 2.5 to 9.5. The ratio of Citric acid to BIS-TRIS propane determines the solution pH. Thirty-five of the forty-eight PEG/Ion 2 reagents contain a neutralized or pH adjusted organic acid in the presence of the polymer. Neutralized organic acids are highly effective crystallization salts.1 Four PEG/Ion 2 reagents feature polyvalent cations. Two of these reagents contain cation mixes, saving sample by screening six different cations with only two reagents. Tryptone, a casein digest combinatorial library of peptides, is included in PEG/Ion 2. PEG/Ion 2 reagents 1-30, 42, 45-47 are formulated without a buffer and are not pH titrated.
PEG/Ion contains 48 unique reagents, 10 ml each.
PEG/Ion 2 contains 48 unique reagents, 10 ml each.
PEG/Ion HT contains 1 ml of each reagent from PEG/Ion and PEG/Ion 2 in a single Deep Well block format.
Ready-to-use reagents are sterile filtered and formulated with ultra-pure Type 1 water, using the highest purity salts, polymers, organics and buffers. Individual reagents are available through the Hampton Research Custom Shop.
PEG/Ion • PEG/Ion 2 • PEG/Ion HT

PEG/Ion • PEG/Ion 2 • PEG/Ion HT

Hampton蛋白悬滴结晶板 HDP Hanging Drop Crystallization Plate

Hampton蛋白悬滴结晶板 HDP Hanging Drop Crystallization Plate
美国Hampton Research公司位于加利福尼亚州,是一家专门从事蛋白质晶体研究的生产商。该公司向全球科研人员提供全面的晶体研究试剂和相关实验耗材,同时提供晶体设计和合成方面的定制服务。Hampton Research公司以其先进的生物大分子结晶技术和广泛实用的产品线,不仅为全世界晶体研究人员的工作带来了便捷,而且也受益于科研人员的回馈不断发展自己,目前已成为晶体研究领域最受信赖的品牌之一。
Hampton research主要产品:
Crystallization Screens 用于筛选和优化蛋白质/多肽/核酸结晶的一系列经验证的高精配方型溶液
Optimize Reagents 结晶级别盐类,聚合物,有机溶液或缓冲液
Crystallization Plates, Hardware & Accessories 结晶板(悬滴法和坐滴法,微量透析,微配液,自由界面扩散,凝胶以及无容器悬浮法)及其他配件
Cryocrystallography 低温晶体学耗材如 Crystalcap system,cryoloops
Goniometer Heads&Supplies 测角器头和配件
Protein Crystallization Standards 结晶级别标准蛋白
Custom Shop Crystallization Reagents 定制试剂盒和结晶溶液内的单一组分
StockOptions Kits 内含盐类,缓冲液和冷冻液的简便型试剂盒
Tools,Seeding&Resin 结晶用探针,结晶笔,seeding法结晶工具
Capillary Mounts & Supplies 毛细管,玻璃纤维, 蜡,黏合剂和密封剂
Hampton蛋白悬滴结晶板 HDP Hanging Drop Crystallization Plate
HDP Hanging Drop Crystallization Plate (Swissci)
HDP Hanging Drop Plate
HDP Hanging Drop Crystallization Plate (Swissci)
Single Well with Tool
HDP Hanging Drop Crystallization Plate (Swissci)
Hanging Drop Wells
Applications—Hanging drop crystallization
Features
  Made from optically superior polymer (UVP)
  Allen key novel crystal plug closure system
  Wells are micro-numbered
Description  描述:
The Swissci Hanging Drop Crystallization Plate is a breakthrough for protein crystallization in a 96-well format. For the first time individual wells can be identified and removed without any disturbance to the growing crystals inside the plate.Description
The plate has been developed by Swissci AG together with leading Crystallographers. It is the result of many years of experience in successful robotic high-throughput crystallization.
The Hanging Drop Crystallization Plate offers unique properties that make it ideal for both nanoliter crystallization screening and microliter optimization alike. Made from optically superior polymer (UVP) and with a new design of the wells, the plate allows easy crystal viewing and retrieval. The system is fully covered by design and patent protection.
The Advantages of the Hanging Drop Crystallization Plate
Easy Crystal Retrieval
Raised wide wells make the crystal mounting especially easy. Allen key system allows for smooth removal and subsequent microscopic investigation / X-ray with the novel crystal plug closure all included in the system.
Easy Viewing
The wells are wide conical and have a lens effect for perfect illumination. The micro-numbering ensures you will never loose the location under the microscope.
The optically superior polymer is UV transmissible and can be used to differentiate between salt and protein crystals.
Integral Sealing
Wide partition walls between each well provides a high surface area for very good sealing with the advanced quality sealing tape. The sealing tape is integrated into the kit so there is no need to purchase additional parts prior to starting a procedure.
Wide Range of Volumes
Typical volumes are 50 – 200 µl of reservoir and 10 nanoliter – 5 microliter drop size.
SBS Standard
The complete plate is designed to the 96-well SBS standard for all common holders.

CAT NO NAME DESCRIPTION
HR3-187 Hanging Drop Crystallization Plate (Swissci) 10 plate case

Hampton蛋白悬滴结晶板 HDP Hanging Drop Crystallization Plate 相关产品:

96 Well Hanging Drop Vapor Diffusion Plate
Hanging drop crystallization
ARI Hanging Drop Seals for 96 Well Plates
ARI Hanging Drop Seals for 96 Well Plates
CrystalQuick 96 Well Sitting Drop Plate (Greiner)
Sitting drop crystallization
Detergent Screen HT
96 detergents Deep Well block format
Glass Cover Slide Gizmo Dispenser
Cover Slide Dispenser
Greiner ComboPlate and CrystalBridge
Hanging and sitting drop crystallization
HDP Hanging Drop Crystallization Plate (Swissci)
Hanging Drop Crystallization
Linbro Plate
Hanging drop crystallization
ProCrystal
Protein Crystallization Covers for Hanging Drop Vapor Diffusion
Protein Methods
Daniel M. Bollag, Michael D. Rozycki, & Stuart J. Edelstein
Solubility & Stability Screen
Identify protein specific additives that promote solubility and stability
UVP Hanging Drop Plate Seal (Swissci)
Swissci UVP Hanging Drop Plate Seal
VDX Plate with sealant
Hanging drop crystallization
VDX Plate without sealant
Hanging drop crystallization
VDX48 Plate with sealant
Hanging drop crystallization
VDXm Plate without sealant
Hanging drop crystallization
VDXm Plate with sealant
Hanging drop crystallization